Basement Wall Panels – To end wall panels in the basement; choose a specific preparation and implementation strategy based on the specific composition and condition of the panels. While wood panels provides various finishing, vinyl, plastic, and fiberglass panels is for coatings. In addition, wood paneling requires much less preparation than vinyl, plastic and fiberglass panels, which will throw his new finishes unless adequate preparation strategies employed prior to application.
How to finish the basement wall panels. Grind vinyl and plastic basement wall panels to stimulate adhesion by grinding them with 220-grit paper. Use 300-grit sandpaper to sand fiberglass panels. Coat basement wall panels with a latex primer, using a roll. Smooth the wet primer, using a paintbrush. Wait two hours for the founding basement wall panels to dry. Wash your painting tools with water. Coat the founding basement wall panels with a satin latex paint, using a roller. Smooth the wet paint, using a brush. Wait basement wall panels to dry. Apply additional coats of primer showing through
15 Photos Gallery of: How to Finish the Basement Wall Panels
Then finish the basement wall panels. Fill the sandpaper in a palm sander to facilitate abrasion process. Attach the roller frame to an extension pole to facilitate the application process. Use an oil-based primer on the basement wall panels are made of painted wood. If you want to dye your bare wooden basement wall panels, apply an oil-based stain, using a brush designed for use with oil-based paints. Wait two hours for the dyed basement wall panels to dry. Apply additional layer of darker results. Do not paint over unhanded vinyl, fiberglass and plastic basement wall panels, or the finish will fail. Do not paint over unprimed basement wall panels, or the paint will peel. Some basements lacking proper ventilation. Wear a respirator if your basement does not have enough windows.