Small basement bathroom ideas – A basement bathroom’s exhaust fan draws odors and stale air from the bathroom and pushes it through a metal channel installed in the first bay between floor joists. The metal channel carries the air to a shutter mounted in the space on the outer wall between the studs. When turned on, the air from the bathroom fan forces the lamella’s tabs open. When the bathroom fan goes out, the disc’s flaps close. The closed slats prevent withdrawal in the cellar.
Place the small basement bathroom ideas fan and the exhaust duct. Place the exhaust fan in the bay between the two floor joists above the toilet and explore the Gulf of obstacles. If the bay above the toilet is a barrier between the toilet and the outer wall, move the fan to a bay with a clear run to the outer wall. Install bathroom fan to the soffit with its exhaust duct connection to an outside wall. Attach the fan to the studs with the manufacturer supplied fasteners and screws. Tighten the screws with the correct screwdriver. Drilling holes through the outer wall in the space between the joists with a drill fitted with a 1/2-inch drill. The center hole in the bay between the floor joists. Move outside and center the blind’s channel connection of the half-inch hole. Track channel connecting contour on the outside wall with a pencil.
12 Photos Gallery of: Install a Small Basement Bathroom Ideas Fan
Cut the lamella contour with a reciprocating saw. Install the valve in the hole with the manufacturer supplied mounting screws. Apply a bead of exterior-grade seal where the flap meets the exterior wall. Measure the distance between the end of the curtain and the bathroom exhaust air fan duct connection with a tape. Transfer this measurement to the metal exhaust duct and the cutting channel to size with tin snips. Connect metal exhaust duct to the air damper and fan. Frequent channel connection with metal-supported silver tape. Turn off small basement bathroom ideas switch.